Mahindra Roadmaster

Models

product

Mahindra RoadMaster G75

Product

Mahindra RoadMaster G90

Product

RoadMaster G90 Comfort Plus

Mahindra RoadMaster G75

Pave your road to success

Made in India for Indian roads, is the Mahindra RoadMaster G75 summed up in a few words. After intense research into the road construction scenario in India, we realized that while many large and expensive motor graders from international companies are available in India, none of them are made for India keeping in mind the Indian requirements where more than 90% are other than national highways. This is where the RoadMaster G75 comes into picture.

The RoadMaster G75 is created to offer an affordable, un-compromised and mechanized grading solution for small & medium roads in India. It is designed with extensive research and input from Indian road contractors. The RoadMaster G75 is an ideal grading machine for spreading, grading of earthwork in different types of roadwork across the nation in addition to being used for railway and ground levelling operations across sectors. The G75 is designed to provide optimal output at affordable cost with its simple yet rugged design. The RoadMaster G75 comes with GPRS based remote monitoring system DigiSense that keeps a track of your machine with the touch of a finger.

Backed by the robust network of dealers and service centres across India, the RoadMaster G75 is sure to pave you a smooth road to success.

FEATURES

Mahindra has taken its learnings from tractor engines, to bring its fuel efficiency down to an incredible 4.5* litres per hour. 10%* more savings with Mahindra’s DITEC engine, 79.95 HP turbocharged intercooled diesel engine, fuel efficient, compact 4 cylinder, 3532cc engine, BS III pollution compliant.

Lowest Maintenance in class

With better technology and design enhancements, Mahindra has been able to lower lubricant refilling requirement with extended service intervals, thus reducing the overall maintenance cost. Hydraulic Oil: 50 litres with 2000 hours change interval, Rear Axle Oil (Differential): 14.5 litres with 1500 hours change interval, Engine Oil: 13.5 litres with 500 hours change interval, Transmission Oil: 16 litres with 1000 hours change interval.

The 3000 mm Mouldboard comes with an option of having its size reduced by 400 mm. Depending on the requirement the blade size can be reduced by 200 mm on both sides. The cutting edge has a lasting life of about 600 hrs on standard operation cycle.

Added versatility

The RoadMaster G75 comes with the option of having additional fitments viz the Ripper and Dozer for added versatility. The Ripper is perfect for ripping hard compacted surfaces before grading while the Dozer helps with spreading.

SUPERIOR CONVENIENCE AND COMFORTABLE DESIGN


Mahindra believes that the most important part of the machine, is the person operating it. That’s why we have worked hard to make his experience the most comfortable for his long hours of work. Ergonomic layout and seating – all controls are smooth and easy to reach, spacious canopy, lockable storage and mobile charging.

SPECIFICATION

Disclaimer

Technical specifications, features are subjected to change without prior notice. Image used are for representative purposes only. Accessories shown may not be a part of the standard product. Actual colours may vary. E & O.E. All dimensions are variable within +/- 5% Standard Exclusions Apply. For further details on the warranty, please contact your dealer.

According to approved independent agency, under manufacturer standard PER/VEH/21 certified at 1450 RPM Value measured under specific measuring condition.

Disclaimer

Technical specifications, features are subjected to change without prior notice. Image used are for representative purposes only. Accessories shown may not be a part of the standard product. Actual colours may vary. E & O.E. All dimensions are variable within +/- 5% Standard Exclusions Apply. For further details on the warranty, please contact your dealer.

According to approved independent agency, under manufacturer standard PER/VEH/21 certified at 1450 RPM Value measured under specific measuring condition.

We are specialized in every field such as industrial and commercial. We have successfully completed many projects with our quality controlled works.

©️2020 PLB Group. All Rights Reserved. Developed by Colours and Patterns.

Model

Mahindra DITEC 4805 IA BSIII CEV

Form of Air Aspiration

Turbo Charged

No of Cylinders

4

Bore

96mm

Stroke

122 mm

Displacement

3532cc

High idle rpm

2500 rpm

Low ideal rpm

850 rpm

Cooling system

Water cooled

Type of fuel

Diesel

Gross horse power

58.8 kW (79.95 HP) @ 2300 rpm

Peak gross torque

306 Nm 1300-1700 rpm

Electrical system voltage

12 V

Gross vehicle weight

7740 kg

FAW

2060 kg

RAW

5680 kg

Speed @ gear (kmph)

Forward

Reverse

1st

4.5 to 6

6.0 to 7.5

2nd

7.5 to 9.0

9.0 to 10.5

3rd

17.5 to 19.5

4th

34.0 to 38.0

Turning radius outside tyre R1

10 m

Steering angle inner wheel

45 degrees

Steering angle outer wheel

32 degrees

Base Length of MB

2600 mm

Thickness of Moldboard

16 mm

Blade Height

H19

516 mm

Standard Length of Cutting Edge

WB

2600 mm {3 piece cutting edge} {1100 + 1100 + 400}

Standard length of cutting edge with side extension

WB

3000 mm {4 piece cutting edge} {1100 + 1100 + 400+ 400}

Width of Cutting Edge

152 mm

Thickness of Cutting Edge

16 mm

Width

C

200 mm

Thickness

C

16 mm

Blade Pull force (Kgs )

3500 max

Blade Down force (Kgs)

3500 max

Distance between mid & rear axle

19

1850 mm.

Distance between front & middle axle

A

4300 mm

Wheel Base

L3

5225 mm

Distance- Front axle to Moldboard Blade base

L12

1691 mm

Transport length

L1

7835 mm

Ground Clearance below front axle beam

H18

528 mm

Minimum Ground Clearance

H4

467 mm

Max vehicle height

H1

3290 mm

Track width- Front

W3F

1674 mm

Track Width Rear

W3R

1654 mm

Width- outside front tires

W1F

2021 mm

Width- outside rear tires

W1R

2001 mm

Width Transport (Without blade extensions)

WW7

2327 mm

Width Transport (With blade extensions)

WW7'

2667 mm

Distance outside front tire and blade (Without blade extensions)

B

153 mm

Distance outside front tire and blade (With blade extensions)

B'

323 mm

Circle rotation angle

AB

30 deg from transverse of vehicle

Circle drive

Hydraulic cylinders with no end mechanical stoppers

Blade side shift (LH/ RH)

W15

513 mm

Blade tilt angle/ Bank cut angle (LH/RH) at ground level measured on blade

A9

[20’ / 15’]

Blade tilt angle/ Bank cut angle (LH/RH) at ground level measured on drawbar

A9’

[25.6’ / 20’]

Blade pitch angle at ground line

A11

Forward 40’ Backward 15’

Blade without extension outside front tire with blade positioned parallel to wheel axis

W9

289.5 mm

Blade outside front tire with blade positioned parallel to wheel axis

W9'

489.5mm

Blade lift at normal blade pitch angle

H20

400 mm

Max blade cut depth below ground at nominal blade angle

D

300 mm

Attachment oscillation angle

E

Upward 15 deg Downward 15 deg

Model Name

Carraro 4WDTransmission

Gear Ratios

Forward / Reverse

1st

5.603 / 4.643

2nd

3.481 / 2.884

3rd

1.585 / 1.313

4th

0.793 / 0.657

Torque converter ratio

2.64

Type

None Driven, Steerable Central Pivoted

Loading Capacity(TON)

8

Type

Driven, Non Steerable, Rigid

Reduction ratio, Differential

2.75

Reduction Wheel end

6.932

Total Reduction Ratio

19.04

Type

Driven, Non Steerable, Central Pivoted

Reduction ratio, Differential

2.75

Reduction Wheel end

6.932

Total Reduction Ratio

19.04

Tyre Spce

13 x 24-12 PR

SLR

600

DLR

603

Wheel Rim Size

9x24

Front / Middle / Rear

44 psi

Service Brake type

Foot operated hydraulically actuated oil immersed disc in middle axle

Parking brake type

Hand operated, mechanically, actuated oil immersed disc in middle axle

Type

Power Steering

Steering Valve

Load sensing with priority valve 200 cc

Other feature

Emergency steering in case of pump failure

System Voltage

12v

Battery Rating

12 V, 100 AH

Alternator type

12 V, 90Amp

System

Open Centre

Pump Type

Fixed Displacement Tandem Gear Pump 21 cc + 21 cc

Max Pump Flow rate

46 litres@ 2300 rpm

Max Working pressure

180 bar

Refill qty

50 litres

System Capacity

60 litres

Other Feature

Load Holding with pressure refill valves for lift and sensing cylinder

Hydraulic tank

50 litres @ 2000 hrs

Fuel tank

85 litres

Engine coolant

17 litres @ 1000 hrs

Engine oil

13.5 litres @ 500 hrs

Transmission

16 litres @ 1000 hrs

Middle axle or Rear axle (Differential)

14.5 Litres @1500 hrs for each axle

Middle Axle or Rear Axle (Final Drive)

1.5 litres (On each wheel end) @ 1500 hrs

Ripper

5 tyne

Dozer

1.98 meter Width