EarthMaster SX 4WD

MODEL

Mahindra EarthMaster SX 4WD

Mahindra is proud to have the Mahindra EarthMaster SX 4WD Backhoe Loader, a revolutionary machine that has set new standards in the 4 wheel drive Backhoe Loader category and take export market by storm. Mahindra EarthMaster SX 4WD is a substantially more superior machine, with greater reliability, dramatically less maintenance, better operational kinematics and dynamics with a phenomenal fuel efficiency.

FEATURES

BEST-IN-CLASS FUEL EFFICIENCY WITH THE PROVEN MAHINDRA DITEC ENGINE
Mahindra has taken its learnings from tractor engines, to bring its fuel efficiency down to an incredible 4.5* litres per hour. 10%* more savings with Mahindra’s DITEC engine, 58.8 Kw (79.89 HP) Turbocharged intercooled, diesel engine, Fuel efficient, compact 4 cylinder, 3532cc engine, BS III pollution compliant.

LOW MAINTENANCE COST, MORE SAVINGS
With better technology and design enhancements, Mahindra has been able to lower lubricant refilling requirement with extended service intervals, thus reducing the overall maintenance cost.

Hydraulic Oil: 50 litres with 2000 hours change interval, Rear Axle Oil: 17.10 litres with 1500 hours change interval, Front Axle Oil: 9.10 litres with 1500 hours change interval, Engine Oil: 13 litres with 500 hours change interval, Transmission Oil: 12 litres with 1000 hours change interval.

SUPERIOR PRODUCTIVITY AND PERFORMANCE
Simple ideas, lead to great improvements. Mahindra EarthMaster SX 4WD is a substantially faster machine loaded with features that lead to far greater productivity.

Banana Boom with 7%* more reach, Rugged and reputed Gear Pump, Maximum Dig Depth: 4959 mm#, Loader Dump Height: 2715 mm, Maximum Load Over Height (Loader) : 3267 mm.

SUPERIOR CONVENIENCE AND COMFORTABLE DESIGN
Mahindra believes that the most important part of the machine, is the person operating it. That’s why we have worked hard to make his experience the most comfortable for his long hours of work.

Ergonomic layout and seating – all controls are, smooth and easy to reach, Advanced Mechanical Control Levers, 21st century styling, with plush car like interiors, Personal Storage Space and Tool Box with easy access.

SPECIFICATION

Disclaimer

  • Technical specifications, features are subjected to change without prior notice. Image used are for representative purposes only.
  • Accessories shown may not be a part of the standard prouct. Actual colours may vary. E & O.E.
  • ^ Standard Exclusions Apply. For further details on the warranty, please contact your dealer.
  • * According to approved independent agency, under manufacturer standard PER/VEH/21 certified at 1450 RPM
  • # Value measured under specific measuring condition.

Disclaimer

  • Technical specifications, features are subjected to change without prior notice. Image used are for representative purposes only.
  • Accessories shown may not be a part of the standard prouct. Actual colours may vary. E & O.E.
  • ^ Standard Exclusions Apply. For further details on the warranty, please contact your dealer.
  • * According to approved independent agency, under manufacturer standard PER/VEH/21 certified at 1450 RPM
  • # Value measured under specific measuring condition.

We are specialized in every field such as industrial and commercial. We have successfully completed many projects with our quality controlled works.

©️2020 PLB Group. All Rights Reserved. Developed by Colours and Patterns.

Excavator Controls

Mechanical Levers

Instrument Cluster

Analog

DiGi sense - GPS, GPRS base vehicle health monitoring & tracking system(optional)

Warranty

1 year^ Standard Warranty, Unlimited Hours

Banana Boom Design

Yes

180 Deg Revolving Seats with Arm rest and Seat Belts

Yes

Mobile Charger

Yes

Storage Box

Yes

Mahindra DITEC

Turbocharged Intercooled Diesel Engine

No. of Cylinders

4

Displacement

3532 cc

Gross Horse Power

58.8 kw (79.89 HP) @ 2300 +/- 50 RPM

Peak Gross Torque

306 Nm @1300-1700 RPM

Optimized hydraulic system with fixed displacement gear pump delivering 115 liters at 2350 RPM, Circuit Operating at 250 bars (3675 psi)

System Type and Pressure

Open Centre: 250 Bars (3675 psi)

Pump Type

Fixed Displacement Gear Pump

Pump Delivery

115 litres @ 2350 RPM

Control Valves (Backhoe Loader)

Sectional Valves (Sandwich Type, Individually Replaceable)

Type: Four Speed (4 Forward, 4 Reverse), Low Noise, Four Wheel Drive (4 WD), Synchro Shuttle Transmission with Electrically Operated Reversing Shuttle and Torque Convertor having Stall Ratio of 2.64:1

Rear Axle:
Rigidly mounted drive axle, with outbound planetary final drives, driven by short drive shaft.

Front Axle:
Centrally pivoted, driven and streered for 4 wheeler drive axle, with total oscillation of 16°

Service Brakes:
Hydraulically actuated, self-adjusting, maintenance free, oil immersed multi-disc, on the rear axle, operated by independent foot pedals, joined together for normal operation.

Parking Brakes:
Hand operated, inbuilt in the rear axle, low maintenance.

Dust-proof switches, ignition controls for engine start, horn and reverse alarm, water and dust proof electrical connectors.

100Ah, 12V, Low maintenance battery.

Alternator: 90 Ampere.

Ergonomically designed cab with contemporary styling, excellent operator comfort, day and night time visibility, rear view mirror, multiple storage options, two door access, sliding rear window, stowable doors and an integrated tool box.

Cabin frame built with sturdy tubular sections and protected with CED technology for longer rust protection.

Fully adjustable premium operator seat with safety belt. Excellent leg space, conveniently positioned control levers and pedals.

Low line curved hood to enhance operator visibility.

Front wheel hydrostatic power steering, with priority function and manual override in case of engine or hydraulic power failure, Working pressure of 145 bar.

Front Cluster:
With Speedometer, Turn and Head Light Signals indicating RPM, Kilometers Run, Hours Run, Fuel Level, Temperature

Maximum Dig Depth

4959 mm

Reach at Ground Level to Slew Centre

5761 mm

Reach at Full height to Slew Centre

2676 mm

Maximum Working Height

6043 mm

Maximum Load Over Height

4302 mm

Excavator Pivot Mechanism

Side Shift

Side Reach to the Centre of the Machine

6291 mm

Excavator Bucket Breakout Force

5199 kg

Excavator Arm Breakout Force

3182 kg

Lift Capacity to Bucket Pivot at Full Reach ( no bucket fitted) ( SAE J31)

1449 kg

Backhoe Bucket Capacity

0.27 CuM

Dump Height

2715 mm

Load Over Height

3267 mm

Maximum Reach at Full Height

1100 mm

Loader Bucket Breakout Force

6243 kg

Loader Arm Breakout Force

5594 kg

Loader Lift Capacity at full height

3428 kg

Loader Bucket Capacity

1.1 CuM, Also available in 6-in-1 bucket

1st F/R

5.66 km/hr

2nd F/R

9.11 km/hr

3rd F/R

20.00 km/hr

4th F/R

39.97 km/hr

SYSTEM CAPACITIES

SERVICE REPLACEMENT CAPACITIES

Hydraulic Oil Capacity

100 Litres

50 Litres

Diesel Tank

120 Litres

120 Litres

Engine Coolant

17 Litres

17 Litres

Engine Oil

13.7 Litres

13 Litres

Transmission Oil

22 Litres

12 Litres

Rear Axle Oil

17.10 Litres

17.10 Litres

Front Axle Oil

9.10 Litres

9.10 Litres

STANDARD (TRACTION)

OPTIONAL (HEAVY DUTY)

Front

12.5 x 18 -12PR

12.5 x 18 -12PR

Rear

16.9 X 28-12PR

14 X 25-20PR / 12PR

Outside Bucket (Inner Wheels Braked)

4494 mm

Outside Wheels (Inner Wheels Braked)

3083 mm

Outside Bucket (Inner Wheels Not Braked)

5099 mm

Outside Wheels (Inner Wheels Not Braked)

3825 mm

Shipping weight of the Machine with Industrial Tyres

7730 kg

Shipping Weight of Machine with HD Tyre

7880 kg